New Holland Discbine 210

Double tap to zoom

 

Features

QUALITY AND SPEED IN A 9’2” AND 10’4” MACHINE

The new Discbine® 209 and Discbine® 210 disc mower-conditioners help you make the very highest-quality hay, and help you keep more of it. They cut crop closely, cleanly and quickly, and condition it uniformly for faster drydown, preserving nutrients.

BUILT ON A LEGACY OF QUALITY

New Holland pioneered the Haybine® mower-conditioner to save time by combining what was once a two-step process with different machines, into a single solution. Today’s modern Discbine models are built on that same legacy, improved to meet your needs and offer faster mowing and effective conditioning that saves time while speeding crop drying.

TAKES THE WORRY OUT OF CUTTING CLOSE

The reliable MowMax system saves you worry, time, aggravation and repair costs because it’s a truly modular design. Each disc module is independent, sealed in its own oil and protected from harmful impacts by exclusive ShockPRO™ hubs.

INCREASE TONNAGE WITH THE QUICKMAX™ SYSTEM

Sharp knives give you the clean cut you want, with less crop left behind. As a result, tonnage is increased, you get fast regrowth and forage quality is assured for next cutting. It’s easy to stay sharp with the standard QuickMax™ knife change system. It allows you to quickly change damaged knives or flip an entire set to achieve that cleanly mown look that’s a haymaker’s pride.

HIGHER RETAINED QUALITY THROUGH FASTER DRYDOWN

Faster hay drying not only means beating the weather, it allows you to get crop out of the field with maximum feed quality. New Holland offers three effective, fast-drying conditioning solutions, including gentle rubber chevron intermeshing rolls, steel chevron rolls for added durability, and LeaningEdge™ flail tines that are ideal for grass hay. No matter the system, each offers fast, infinite adjustments to conditioning intensity to match crop and weather conditions.

PRODUCTIVITY SIZED TO YOUR DEMANDS

You can maneuver easily in small and oddly shaped fields with both of these nimble side-pull models. The Discbine 209, with its straight tongue and standard hitch design, is perfect for utility-size haymaking tractors. If your operation or schedule demands more acres every hour, the wider-cutting Discbine 210 decreases mowing time by up to 10%. Unlike other side-pull disc mower-conditioners, the tongue of the Disbine 209 and 210 pivots at the side of the trail frame, providing a clear view of the front of the machine while cutting hay.

Specifications

Cutterbar  
Cutting width ft. in. (m) 10’ 4” (3.16)
Cutterbar model MowMax™ Modular Cutterbar with ShockPRO™ hubs
Number of discs 8
Knives per disc 2
Disc speed @ 540 rpm PTO speed rpm 3000
Tilt angle degrees 2° - 10°
Flotation Up & back, adjustable springs
Drive method PTO drive with slip & overrunning clutch to bevel gearbox to LH end of header, vertical PTO shaft to cutterbar
Cutting height in. (mm) Flail Tine: 1.1-2.7 (29-68) or Roll: 95-2.4 (24-60)
Cutting height w/optional high-stubble shoes in. (mm) 2.25-4.5 (58-115)
Cutting height w/optional adjustable shoes in. (mm) 2.25-4.5 (58-115)
Roll Conditioners  
Type Chevron intermeshing rubber or steel rolls
Length / Diameter in. (mm) 102 (2591) / 10.4 (264)
Drive method 4 HB V-belt and enclosed gears
Speed rpm 647
Conditioner roll tension adjustment Single crank
Conditioner gap adjustment Adjustable drawbolt stop, each end
LeaningEdge Flail Conditioners  
Type Flail rotor with 100 tapered flails
Length / Diameter in. (mm) 102 (2591) / 22 (560)
Drive method 4 HB v-belt
Speed rpm 718 std. 1000 opt.
Conditioner gap adjustment Single crank adjustable rotor hood
Crop Discharge  
Swath width ft. (m) 7 (2.13)
Windrow width ft. (m) 3-7 (0.9-2.13)
Driveline  
Input speed rpm 540 or 1000 Standard Drawbar Attachment, 540 Only Swivel Hitch Attachment
Driveline protection Slip clutch and overrunning clutch assembly at rear of PTO shaft
Secondary driveline Double CV Driveline - Head repositionable under load
Tongue Options  
Type Side-pull, straight tongue
Hitch type Standard Drawbar with CV PTO, Swivel hitch with drawbar adapter or 2-point hitch
Tractor Requirements  
Minimum PTO power required hp (kW) 80 (60)
Hydraulic circuits required 2
Minimum relief pressure required psi (bar) 1500 (103)
Drawbar ASAE Category II
Swivel Hitch - Drawbar ASAE Category II or III
Swivel Hitch - 2-point ASAE Category II, III-N, or III
Electrical 7-pin electrical connector for transport lights
Tires  
Tubeless ag rib implement tires Flail Tine: 9.5L x 14L 6PR / Roll: 11L x 15L 6 PR
Transport Speed  
Max road speed mph (kph) 20 (32)
Dimensions  
Width transport ft. in. (m) 11’ 3” (3.42)
Width operating ft. in. (m) 16’ 0” (4.87) / 17’ 7’’ (5.36), with swivel hitch equipped
Length transport ft. in (m) Flail Tine: 18’ 1’’ (5.50)*** or Roll: 17’ 7’’ (5.23)***
Length operating ft. in. (m) Flail Tine: 17’ 8’’ (5.4)*** or Roll: 15’ 7’’ (4.75)***
Height ft. in. (m) Transport: 5’ 3” (1.60) / Operating: 4’ 5” (1.35)
Ground clearance with head fully raised in. (mm) Flail Tine: 17 (4.32) or Roll: 18 (4.57)
Weights  
Operating weight lbs. (kg) Flail Tine: 4100 (1864)*** / Roll: 4160 (1891)***