New Holland ProRotor.3226

Double tap to zoom

 

Features

PROROTOR™ 3226 DUAL ROTOR, CENTER-DELIVERY RAKE
The ProRotor 3226 rotary rake features a dual-rotor, center-delivery design and a large working width is perfect to bring together two swaths from your large mower-conditioner or self-propelled windrower head.

Raking up to 25 ft. 7 in. each pass ProRotor 3226 will make quick work of even your largest fields. The central chassis with rear-wheel steering allows this rake follow your tractor precisely forming long straight easy-to-bale windrows with gentle turns that are a ideal for large square and round balers.

Large hydraulic cylinders lift the rotors easily on headlands and the 85° maximum turning angle allows for fast maneuvering so you can work productively.
Rotors mounted on a pivot and rotor arms to flex in three-dimensions they follow ground contours close to rake even your rolling fields clean.

Specifications

ProRotor.3226
Finish
Paint Powder Paint
Cutting Width/Discharge
Crop Delivery Center
DIN Width - Sing Swath or Min (m/ft) 7/23
DIN Width - Double Swath or Max (m/ft) 7.8/25.6
Dimensions
Length (m/ft) -
Transport Length (m/ft) 5.9/19.4
Width (m/ft) 2.8/9.2
Transport Width (m/ft) 2.8/9.2
Transport Height w/ arms removed (m/ft) 3.5/11.3
Height (m/ft) 4.1/13.5
Capacity (hph/aph) 8.4/20.8
Weight (kg/lb) 1640/3616
Rotor Diameter (m/ft) 3.4/11
Clean Swept Working Width (not noted on supplied tables) (m/ft) 2 x 3.0/2 x 9.8
Cam Track Diameter (mm/in) 260/10.2
Minimum Tractor Requirement
Power Requirement (kw/hp) 37/50
PTO Speed 540
PTO Type Single Wide Angle CV
Overrunning Clutch Integral to PTO
Protection Individual Radial Pin Clutch on each Rotor
Tractor Attachment
Hitch 2pt Semi-Mounted Category 2
Special Hitch Pin NR
Operational
Rotor Articulation System 3D
Num. Rotors 2
Num. Arms / Rotor 11 Right / 11 Left
Num. Tines / Arm 4
Tine Arm Diameter (mm/in) 35/1.4
Tine Arm Attachment to Gearbox 2 bolts
Tine Arm Removal for Transport/Storage Lynch pin
Tine Diameter (mm/in) 9/0.4
Front Swath Board Standard w/ Central Swath Board
Rear Swath Board N/A
Swath Board Adjustment/Folding Hydraulic Folding for Transport
Height Adjustment Mech Hand Crank Adjustment
Rotor Headland Clearance (mm/in) -
Removable Tine arms/ Folding Guards Standard
Undercarriage Tires/Wheels 16x6.5-8 PR6
Axle Dual Nose wheel / Single rear Optional Tandem Axle Kit
Hyd. Requirements 1 Single Acting
Chassis Tires/Wheels 10.0/75-15.3
Rear Wheel Steering Standard
Max. Turning Angle 85 deg
Safety
Transport Lighting Standard
Transport Safety Chain/Hitch Check Chains N/A
SMV Emblem Standard
Electrical/Lighting
Transport Lighting Requirement ASAE 7 Pin
Electrical Requirements NA
Operating Speed
Operational Speed 8-14 k/h / 5-8.5 mph