New Holland L228

Double tap to zoom



You can expect fast cycle times from the reliable hydraulic
system. The in-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics on the L218, L220, L221, L228, L234, C227, C232,C238 to run attachments hour after hour. The Spring Applied Hydraulic Release (SAHR) parking brake can be released or applied by the press of a button and is automatically applied when machine is shut off.

The 200 Series dual-range transmission can provide travel
speeds in excess of 11 mph (8 mph on CTLs) to save time on and between job sites. It is standard on the L220, L221, L228, L234 and all CTLs.



Manufacturer/model FPT /F5H FL463A*F001
Bore/stroke, in (mm) 3.9 x 4.3 (99 x 110)
Displacement, in3 (L) 207 (3.4)
Fuel injection HPCR Direct
Air intake Turbocharged Aftercooled with external EGR
Horsepower per SAE J1349 Gross hp (kW) 74 (55) @ 2500 rpm
Horsepower per SAE J1349 Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (Nm) 232 (314) @ 1400 rpm


Power Train

Travel speed, low range, mph (km/h) 7.0 (11.3)
Travel speed, high range (optional), mph (km/h) 10.5 (16.9)



Height to
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised, in (mm) 122.6 (3115)
Overall length without attachment with coupler, in (mm) 117.8 (2993)
Dump angle, degrees 54.7
Dump reach (max height), in (mm) 32.3 (821)
Rollback, bucket on ground, degrees 33.8
Rollback, bucket at full height, degrees 84.8
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan), in (mm) 8 (203)
Angle of departure, degrees 23.5
Clearance circle without bucket, in (mm) 56.2 (1428)
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Overall width, in (mm) 69.6 (1768)


Hydraulic System

Pump flow, Standard Flow, gpm (Lpm) 24.2 (91.5)
Relief pressure, psi (bar) 3046 (210)
Optional high flow, gpm (Lpm) 37.6 (142.5)


Performance Specs

Rated operating load, 50% tip, lbs (kg) 2800 (1270)
Tipping load, lbs (kg) 5600 (2540)
Breakout force, lift cylinder, lbs (kN) 6030 (27.3)
Breakout force, bucket cylinder, lbs (kN) 8620 (38.3)
Operating weight, lbs (kg) 8245 (3740)