2026 Danuser® Fence Post Drivers Hammer Skid-Steer Quick Attach SM40

Information

2026 Danuser® Fence Post Drivers Hammer Skid-Steer Quick Attach SM40

Hammer EM40 with Tilt and Grapple Loaded

Built for Euro/Global mount loaders, the EM40 Hammer combines visibility, control, and power. The offset design improves sightlines around the tractor’s nose, while the 300 lb. hammer drops 40" for consistent impact. With the weight kit, total impact force increases to 500 lb., delivering up to 60% more driving power. The grapple enables solo operation from the cab, and the tilt feature offers up to 20° of adjustment, perfect for working on slopes or uneven ground.

Use the EM40 Hammer to drive:

  • Fence Posts
  • Sign Posts
  • Guard Rails
  • Median Dividers
  • Tent Stakes
  • T-Posts
  • Pipe Fence
  • Railroad Ties
  • And More

CB40 Breaker Kit is available to convert any Hammer post driver into a concrete breaker.

NOTE: If post/pipe diameter is 5" or smaller and you have a helper, PN 21395 Donut Strike Plate must be purchased separately. If driving with one person, PN 21212 Horseshoe Strike Plate is a better option. See Accessories tab below.

Photos

Highlights

  • Jonesborough, Tennessee
  • 2026
  • Danuser®
  • Fence Post Drivers Hammer Skid-Steer Quick Attach SM40
  • Available
  • Maximum Post: 8.5" x 9.25"

Specifications

  • 2026
  • Danuser®
  • Fence Post Drivers Hammer
  • Skid-Steer Quick Attach SM40
  • Auger/Post Hole Diggers
  • Tractor Requirements: 75 HP Minimum
  • Impact Force: 82,000 lb. | Impact Energy: 1,709 ft.-lb. | Strokes per Minute: 35
  • Requirements: 1,500 - 3,000 PSI; 12 - 30 GPM
  • Tilt (left or right): 20°
  • Of Stroke: 40"
  • Maximum Post: 8.5" x 9.25"
  • 45.5"
  • 25.5"
  • 64"
  • Machine: 1,245 lb. | Hammer: 500 lb.
  • Post Dimensions: T-post to Railroad tie